Developments where developmentType is Part

Title Description Source Status
3 Jaw Z Coupling for Prusa Mendel This is a new 3-jaw coupling that allows z alignment adjustment. Thingiverse Working
555 timer controlled heated print bed PCB heated bed with a standalone 555-timer based controller. Blog Working
Accessible Wade's Extruder This is an extruder based strongly on the wades from the Prusa git repo. It has several features over the standard wade: + Accessible hobbing + The motor can be removed without removing the large gear. + Slightly higher gear ratio than standard wade. This design uses 43:10 instead of 37:11. Thingiverse Obsolete
Accessible Wade's Extruder 9/47 "I have changed the gears to 9:47 for better torque. The top is now closed. It is now easier to open the Idler. The heater barrel hole is now 10mm. The Gears dont fit at the "normal" Accessible Wade !! Stoffel15RepRap-Fab.org" Thingiverse Working
Airtripper's Bowden Extruder V3 "The bowden extruder was originally designed to fit the Sumpod 3d printer to replace the bulky MDF extruder housing that was awkward to use. However, the bowden extruder can be used for other 3d printers making use of it’s simple bracket, and the extruder has been popular with the Rost... Thingiverse Working
Arcol.hu Hot-End Commercial hot-end from Arcol.hu Other Working
Arcol.hu v4.0 Hot-End Latest version of the Arcol Hotend. Other Working
Ausxmods Pulley for Prusa Mendel "When I printed the standard pulley from the Prusa git repository, I found that my T5 belt didn't quite fit it and the belt would ride up on the teeth. In response to this, I modified the design iteratively, just printing the tooth portion until I came up with a design that meshed nicely wit... Thingiverse Working
Auto retracting z-probe A probe that can make Z measurements and then retract itself out of the way. It was designed for HydraRaptor but can probably be adapted for other wooden machines like Makerbot. Blog Working
Bamboo Hot-End Bamboo as an Alternative to PEEK or PTFE Blog Working
Birdstruder for MakerGear Plastruder "This is an extruder block designed for the MakerGear Plastruder that allows for quick change of filament and easy clean up after a filament strip." Thingiverse Working
Bowden Syringe Extruder "This thing makes it possible to extrude liquids and gels with no heavy parts on the carriage of your machine. It features a 10ml syringe that feeds the moving end via a 3/2mm tube. On the moving end is a standard luer connector, so you can connect different types of nozzles." Thingiverse Working
1 - 12 / 126 First, Previous, Next, Last